Imagine the primitive cubic lattice. Now imagine pushing on top of it, straight down. Next, stretch another face by pulling it to the right. All angles remain 90°. What kind of primitive lattice have you made?

Verified step by step guidance

Step 1: Identify the initial structure as a primitive cubic lattice, where all sides are equal, and all angles are 90°.

Step 2: Apply pressure from the top, which compresses the lattice along one axis, reducing the height of the unit cell.

Step 3: Stretch the lattice by pulling one face to the right, which increases the length of the unit cell along that axis.

Step 4: Observe that all angles remain 90°, but the unit cell now has different lengths along the three axes.

Step 5: Conclude that the resulting lattice is a tetragonal lattice, characterized by two equal axes and one different axis, with all angles remaining 90°.

Verified video answer for a similar problem:

This video solution was recommended by our tutors as helpful for the problem above.

Video duration:

Was this helpful?

Key Concepts

Here are the essential concepts you must grasp in order to answer the question correctly.

Primitive Cubic Lattice

A primitive cubic lattice is a type of crystal structure where atoms are located at the corners of a cube. Each unit cell contains one atom, as the corner atoms are shared among adjacent cells. This lattice is characterized by its simple geometry and is the basis for understanding more complex structures.

Deformation of Lattices

Deformation of lattices refers to the changes in the arrangement of atoms in a crystal structure due to external forces, such as pressure or tension. In this scenario, pushing down on the lattice compresses it, while pulling on a face stretches it, resulting in a new arrangement of atoms while maintaining right angles between the axes.

Types of Crystal Systems

Crystal systems categorize crystals based on their symmetry and lattice parameters. The transformation described in the question leads to a body-centered cubic (BCC) structure, where an additional atom is added to the center of the cube, resulting in a more complex arrangement while preserving the cubic symmetry.

Recommended video:

Guided course

01:11

Types of Aqueous Solutions

Related Practice

Textbook Question

Selected chlorides have the following melting points: NaCl (801 °C), MgCl₂ (714 °C), PCl₃ (-94 °C), SCl₂ (-121 °C) (a) For each compound, indicate what type its solid form is (molecular, metallic, ionic, or covalent-network).

1825

views

Textbook Question

Pure iron crystallizes in a body-centered cubic structure, shown in the figure. but small amounts of impurities can stabilize a facecentered cubic structure. Which form of iron has a higher density?

684

views

Textbook Question

Introduction of carbon into a metallic lattice generally results in a harder, less ductile substance with lower electrical and thermal conductivities. Explain why this might be so.

611

views

Textbook Question

For each of the intermetallic compounds shown in Figure 12.17 determine the number of each type of atom in the unit cell. Do your answers correspond to the ratios expected from the empirical formulas: Ni3Al?

333

views