An astronomical telescope, Fig. 33–36, produces an inverted image. One way to make a telescope that produces an upright image is to insert a third lens between the objective and the eyepiece, Fig. 33–39b. To have the same magnification, the non-inverting telescope will be longer. Suppose lenses of focal length 150 cm, 1.5 cm, and 10 cm are available. Where should these three lenses be placed to make a non-inverting telescope with magnification 100x?

(II) A diverging lens is placed next to a converging lens of focal length ƒ_C , as in Fig. 33–14. If ƒ_T represents the focal length of the combination, show that the focal length of the diverging lens, ƒ_D , is given by

1/ƒ_D = (1/ƒ_T) - (1/ƒ_C)

(II) In a film projector, the film acts as the object whose image is projected on a screen (Fig. 33–46). If a 105-mm-focal-length lens is to project an image on a screen 22.5 m away, how far from the lens should the film be? If the film is 24 mm wide, how wide will the picture be on the screen?

Figure 33–51 was taken from the NIST Laboratory (National Institute of Standards and Technology) in Boulder, CO, 2.0 km from the hiker in the photo. The Sun’s image was 15 mm across on the film. Estimate the focal length of the camera lens (actually a telescope). The Sun has diameter 1.4 x 10⁶ km, and it is 1.5 x 10⁸ km away.

<IMAGE>

(II) A planoconvex lens (Fig. 33–2a) has one flat surface and the other has R = 15.3 cm. This lens is used to view a red and yellow object which is 62.0 cm away from the lens. The index of refraction of the glass is 1.5106 for red light and 1.5226 for yellow light. What are the locations of the red and yellow images formed by the lens?

The focal length f of a converging lens can be found by placing an object of known size at various locations in front of the lens and measuring the resulting real-image distances dᵢ and their associated magnifications m (minus sign indicates that image is inverted). The data taken in such an experiment are given here:

(a) Show algebraically that a graph of m vs. dᵢ should produce a straight line. What are the theoretically expected values for the slope and the y-intercept of this line? [Hint: dₒ is not constant.] (b) Using the data above, graph m vs. dᵢ and show that a straight line does indeed result. Use the slope of this line to determine the focal length of the lens. Does the y-intercept of your plot have the expected value?

BIO The Lens of the Eye. The crystalline lens of the human eye is a double-convex lens made of material having an index of refraction of 1.44 (although this varies). Its focal length in air is about 8.0 mm, which also varies. We shall assume that the radii of curvature of its two surfaces have the same magnitude. Find the radii of curvature of this lens.

A 1.0-cm-tall object is 110 cm from a screen. A diverging lens with focal length -20 cm is 20 cm in front of the object. What are the focal length and distance from the screen of a second lens that will produce a well-focused, 2.0-cm-tall on the screen?

A 15-cm-focal-length converging lens is 20 cm to the right of a 7.0-cm-focal-length converging lens. A 1.0-cm-tall object is distance L to the left of the 7.0-cm-focal-length lens. What are the height and orientation of the final image?