An incandescent lightbulb produces 100 W of light. If this lightbulb operates at 25% efficiency (meaning that out of all the power it generates, only 25% is released as light), what resistance must the lightbulb have if it operates at 120 V?

A flashlight uses two AA 1.5-V batteries connected in series to provide 3.0 V across the bulb, as in Fig. 25–4b. The bulb draws 135 mA when turned on.

(a) Calculate the resistance of the bulb and the power dissipated.

(b) By what factor would the power increase if four AA batteries in series (total 6.0 V) were used with the same bulb? (Neglect heating effects of the filament.) Why shouldn’t you try this?

The performance of the starter circuit in a car can be significantly degraded by a small amount of corrosion on a battery terminal. Figure 26–88a depicts a properly functioning circuit with a battery (12.5-V emf, 0.02-Ω internal resistance) attached via corrosion-free cables to a starter motor of resistance R_s = 0.15Ω. Sometime later, corrosion between a battery terminal and a starter cable introduces an extra series resistance of only R_C = 0.10Ω into the circuit as suggested in Fig. 26–88b. Let P₀ be the power delivered to the starter in the circuit free of corrosion, and let P be the power delivered to the starter with corrosion. Determine the ratio P/P₀.

A hair dryer operates at 120 V (the voltage produced by a household outlet), and outputs 1200 W of energy. For this problem, treat the hair dryer as a single resistor. 

(a) At what current does the hair dryer operate?
(b) What is the resistance of the hair dryer?

A typical small flashlight contains two batteries, each having an emf of 1.5 V, connected in series with a bulb having resistance 17 Ω. If the batteries last for 5.0 h, what is the total energy delivered to the bulb?

A typical small flashlight contains two batteries, each having an emf of 1.5 V, connected in series with a bulb having resistance 17 Ω. If the internal resistance of the batteries is negligible, what power is delivered to the bulb?