A 2.0 cm×2.0 cm square loop of wire with resistance 0.010 Ω has one edge parallel to a long straight wire. The near edge of the loop is 1.0 cm from the wire. The current in the wire is increasing at the rate of 100 A/s. What is the current in the loop?

CALC Let's look at the details of eddy-current braking. A square loop, length l on each side, is shot with velocity v₀ into a uniform magnetic field B. The field is perpendicular to the plane of the loop. The loop has mass m and resistance R, and it enters the field at t = 0 s. Assume that the loop is moving to the right along the x-axis and that the field begins at x = 0 m. Find an expression for the loop's velocity as a function of time as it enters the magnetic field. You can ignore gravity, and you can assume that the back edge of the loop has not entered the field.

CALC Let's look at the details of eddy-current braking. A square loop, length l on each side, is shot with velocity v₀ into a uniform magnetic field B. The field is perpendicular to the plane of the loop. The loop has mass m and resistance R, and it enters the field at t=0 s. Assume that the loop is moving to the right along the x-axis and that the field begins at x = 0 m. Calculate and draw a graph of v over the interval 0 s ≤ t ≤ 0.04 s for the case that v₀=10 m/s, l = 10 cm, m = 1.0 g, R = 0.0010 Ω, and B=0.10 T. The back edge of the loop does not reach the field during this time interval.

CALC The rectangular loop in FIGURE CP30.81 has 0.020 Ω resistance. What is the induced current in the loop at this instant?

One way to measure the strength of a magnetic field is with a flip coil. Suppose a 200-turn, 4.0-cm-diameter coil with a resistance of 2.0 Ω is connected to a ballistic galvanometer, a device that measures the total charge passing through. The coil is held perpendicular to the field, then quickly flipped 180° so that the opposite side is facing the magnetic field. Afterward, the galvanometer reads 7.5 μC. What is the field strength? Hint: Use I = dq/dt to relate the net change of flux to the amount of charge that flows through the galvanometer.

A rocket zooms past the earth at v=2.0×10⁶ m/s. Scientists on the rocket have created the electric and magnetic fields shown in FIGURE EX31.4. What are the fields measured by an earthbound scientist?

The magnetic flux through a coil of wire containing two loops changes at a constant rate from -68 Wb to +48 Wb in 0.42 s. What is the emf induced in the coil?

(II) The area of an elastic circular loop decreases at a constant rate, dA/dt = -3.50 x 10^-2 m²/s. The loop is in a magnetic field B = 0.35 T whose direction is perpendicular to the plane of the loop. At t = 0, the loop has area A = 0.285 m². Determine the induced emf at t = 0, and at t = 2.00 s.

(II) A circular wire loop of radius 𝓇 = 12 cm is in a uniform magnetic field B = 0.400 T with its plane perpendicular to the direction of the field. If the field magnitude begins to decrease at a rate of -0.010 T/s, at what rate should 𝓇 be increasing at this instant so that the induced emf within the loop is zero?