Question 1

Which of the following best describes the main difference between an electric motor and an electric generator?

Accepted Answer

An electric motor converts electrical energy into mechanical energy, while an electric generator converts mechanical energy into electrical energy.

Question 2

According to Faraday’s Law, what is the formula for the induced emf ($$\varepsilon) in a $$coil with $$N$$ turns, when the magnetic flux changes by $$\Delta \Phi in $$time $$\Delta t$$?

Accepted Answer

$$\varepsilon = -N \frac{\Delta \Phi}{\Delta t}$$

Question 3

A circular coil of radius 3 cm with 150 loops is pulled from a magnetic field of $$3.8\ \mathrm{T} to a $$region with zero field in $$0.2\ \mathrm{s}. $$What is the induced emf in the coil?

Accepted Answer

$$8.25\ \mathrm{V}$$

Question 4

Which of the following actions will NOT increase the induced emf in a generator?

Accepted Answer

Decreasing the area of the coil perpendicular to the magnetic field

Question 5

What is the direction of the induced current in a coil when a north pole of a magnet is pushed toward it?

Accepted Answer

The coil induces a north pole on the side facing the magnet to oppose the approach.

Question 6

Which law explains why a voltmeter in a wind speed gauge produces a reading when the cups spin?

Accepted Answer

Faraday’s Law of Electromagnetic Induction

Question 7

A current flows into the page. According to the right-hand rule, what is the direction of the magnetic field lines around the wire?

Accepted Answer

Clockwise

Question 8

Which of the following statements about alternating current (AC) is correct?

Accepted Answer

Electrons change direction continuously.

Question 9

In a coal-fired power plant, what is the main energy conversion that occurs in the generator?

Accepted Answer

Mechanical energy to electrical energy

Question 10

A coil is placed perpendicular to a magnetic field. Which orientation will produce the maximum induced emf when the coil is moved?

Accepted Answer

When the area of the coil is perpendicular to the magnetic flux lines

Question 11

A student wants to increase the sensitivity of a wind speed gauge based on electromagnetic induction. Which of the following modifications would NOT help?

Accepted Answer

Using a heavier magnet

Question 12

Which of the following is a necessary condition for inducing a current in a coil?

Accepted Answer

There must be a change in the magnetic flux linkage

Question 13

If the resistance of a coil is $$10\ \Omega$$ and the induced emf is $$8.25\ \mathrm{V}$$, what is the induced current?

Accepted Answer

$$0.825\ \mathrm{A}$$

Question 14

Which of the following best describes electromagnetic induction?

Accepted Answer

The process of generating electricity by changing the magnetic field acting on a conductor

Question 15

A magnetic flux of $$0.02\ \mathrm{Wb}$$ passes through a coil of area $$2\ \mathrm{cm}^2. $$What is the magnetic field strength $$B$$?

Accepted Answer

$$B = \frac{\Phi}{A} = \frac{0.02}{2 	imes 10$$^{-4}$$} = 100\ \mathrm{T}$$

Question 16

Which of the following is NOT a way to increase the induced emf in a coil?

Accepted Answer

Decrease the rate of change of magnetic flux

Question 17

Which of the following is a correct hypothesis for an experiment where the size of cups on a wind gauge is varied?

Accepted Answer

As the cup size increases, the voltage induced increases.

Question 18

Which variable should be controlled to ensure a fair test when measuring the effect of cup size on induced voltage in a wind gauge?

Accepted Answer

Number of cups catching wind

Question 19

Which of the following is a real-world application of electromagnetic induction?

Accepted Answer

Electric guitar pickups converting string vibrations into electrical signals

Electromagnetic Induction and Electrical Machines: Motors and Generators

Study Guide - Practice Questions

Study Guide - Flashcards