31. Alternating Current

A 20 nF capacitor is connected across an AC generator that produces a peak voltage of 5.0 V. What is the instantaneous value of the emf at the instant when i_C = I_C?

What is the peak current supplied by the emf in FIGURE P32.42?

What is the peak voltage across the 3.0 μF capacitor?

The small transformers that power many consumer products produce a 12.0 V rms, 60 Hz emf. Design a circuit using resistors and capacitors that uses the transformer voltage as an input and produces a 6.0 V rms output that leads the input voltage by 45°.

A capacitor is connected across an ac source that has voltage amplitude 60.0 V and frequency 80.0 Hz. What is the phase angle Φ for the source voltage relative to the current? Does the source voltage lag or lead the current?

A capacitance C and an inductance L are operated at the same angular frequency. (a) At what angular frequency will they have the same reactance? (b) If L = 5 00 mH and C = 3.50 μF, what is the numerical value of the angular frequency in part (a), and what is the reactance of each element?

A capacitor is connected across an ac source that has voltage amplitude 60.0 V and frequency 80.0 Hz. What is the capacitance C of the capacitor if the current amplitude is 5.30 A?

(a) Compute the reactance of a 0.450-H inductor at frequencies of 60.0 Hz and 600 Hz. (b) Compute the reactance of a 2.50-μF capacitor at the same frequencies. (c) At what frequency is the reactance of a 0.450-H inductor equal to that of a 2.50-μF capacitor?

Suppose an air-gap capacitor has circular plates of radius r = 2.5 cm and separation d = 1.6 mm. A 68.0-Hz emf, ε = ε₀ cos ωt, is applied to the capacitor. The maximum displacement current is 35 μA. Determine the maximum conduction current I. Neglect fringing.

Suppose an air-gap capacitor has circular plates of radius r = 2.5 cm and separation d = 1.6 mm. A 68.0-Hz emf, ε = ε₀ cos ωt, is applied to the capacitor. The maximum displacement current is 35 μA. Determine the value of ε₀. Neglect fringing.

Suppose an air-gap capacitor has circular plates of radius r = 2.5 cm and separation d = 1.6 mm. A 68.0-Hz emf, ε = ε₀ cos ωt, is applied to the capacitor. The maximum displacement current is 35 μA. Determine the maximum value of dΦE/dt between the plates. Neglect fringing.

A low-pass filter consists of a 100 μF capacitor in series with a 159 Ω resistor. The circuit is driven by an AC source with a peak voltage of 5.00 V. What is the crossover frequency f_c?

A high-pass RC filter is connected to an AC source with a peak voltage of 10.0 V. The peak capacitor voltage is 6.0 V. What is the peak resistor voltage?

What are V_R and V_C if the emf frequency in FIGURE EX32.19 is 2.5 kHz?

What are V_R and V_C if the emf frequency in FIGURE EX32.19 is 25 kHz?